Description
Aquarium Heater
lt in volume. It is a kettle for large aquariums with a minimum height of 35 cm. After placing perpendicular to the aquarium. It is used by fixing the glass with suction cups located on it
Instruction to Use;
After the heater is fixed in the aquarium, the desired temperature rating is set from the heat setting button in the upper section. Then the water is filled to the level where the green colored "Water Level" is located on the heater and the plug of the heater is plugged into the outlet. The heater will start working in a few minutes. As long as the heating process continues, the "ten" warning light on it will be seen as a red burn. When the heating process is finished, this warning light will go out. HT, which is a sensitive automatic thermostat system, starts to work by detecting even 200 - 0.25 degrees of heat differences, and when the temperature of the water reaches the desired level, the heat is automatically fixed and it stops working
half-life.Cautionary instructions for use should be observed, as the repair of this product is not possible.The product is guaranteed for 2 years against technical failures caused by manufacturer errors.The water level.Under the indication of "water lever" on the heater should not be plugged into the outlet.
Warning; However, it should not be immediately removed from the water and should be waited for 15 minutes.Later, the heater may deteriorate
TetraTec HT 200 W Aquarium Heater
225 - 300 lt in volume.It is a kettle for large aquariums with a minimum height of 35 cm.After placing perpendicular to the aquarium.It is used by fixing the glass with suction cups located on it
TetraTec HT 300 W Aquarium Heater
300 - 450 lt in volume.It is a kettle for large aquariums with a minimum height of 45 cm.After placing perpendicular to the aquarium.It is used by fixing the glass with suction cups located on it
